IPv6 common terms and concepts builtin features of notes tutorials

IPv6 common terms and concepts builtin features of notes tutorials

Node

Any device that runs an implementation of IPv6. This includes routers and hosts.

Router

A node that can forward IPv6 packets not explicitly addressed to itself. On an IPv6 network, a router also typically advertises its presence and host configuration information.

Host

A node that cannot forward IPv6 packets not explicitly addressed to itself (a non router). A host is typically the source and a destination of IPv6 traffic, and it silently discards traffic received that is not explicitly addressed to itself.

Upper-layer protocol

A protocol above IPv6 that uses IPv6 as its transport. Examples include Internet layer protocols such as ICMPv6 and Transport layer protocols such as TCP and UDP (but not Application layer protocols such as FTP and DNS, which use TCP and UDP as their transport).

Link

The set of network interfaces that are bounded by routers and that use the same 64-bit IPv6 unicast address prefix. Other terms for “link” are subnet and network segment.

Network

Two or more subnets connected by routers. Another term for network is internetworks.

Neighbors

Nodes connected to the same link. Neighbors in IPv6 have special significance because of IPv6 Neighbor Discovery, which has facilities to resolve neighbor link layer addresses and detect and monitor neighbor reach ability.

Interface

The representation of a physical or logical attachment of a node to a link. An example of a physical interface is a network adapter. An example of a logical interface is a “tunnel” interface that is used to send IPv6 packets across an IPv4 network by encapsulating the IPv6 packet inside an IPv4 header.

Address

An identifier that can be used as the source or destination of IPv6 packets that is assigned at the IPv6 layer to an interface or set of interfaces.

Packet

The protocol data unit (PDU) that exists at the IPv6 layer and is composed of an IPv6 header and payload.

Link

MTU The maximum transmission unit (MTU)—the number of bytes in the largest IPv6 packet—that can be sent on a link. Because the maximum frame size includes the link-layer medium headers and trailers, the link MTU is not the same as the maximum frame size of the link. The link MTU is the same as the maximum payload size of the link-layer technology. For example, for Ethernet using Ethernet II encapsulation, the maximum Ethernet frame payload size is 1500 bytes. Therefore, the link MTU is 1500. For a link with multiple link-layer technologies (for example, a bridged link), the link MTU is the smallest link MTU of all the link-layer technologies present on the link.

Path

MTU The maximum-sized IPv6 packet that can be sent without performing host fragmentation between a source and destination over a path in an IPv6 network. The path MTU is typically the smallest link MTU of all the links in the path.